IMPORTANT: Create a FrameChannel account before setting up your frame. Create an account HERE. (Be sure to write down your Username and PIN as you'll need these when setting up your frame.)

If you need additional help, take a look at our FAQs or Contact Us.

Step 1: Connect your frame to your WiFi network

Power on your frame and select the Wi-Fi icon.

Select the WiFi scan icon to scan for available networks and press ENTER. Your frame is now connected. Press ESC to return to the main menu.

Step 2: Install and run the EDGE WiFi Setup Utility.
Note: You'll need your FrameChannel username and PIN to complete this step.

Install the EDGE WiFi Setup Utility on your computer using the supplied CD. Once installed, double-click the EDGE WiFi Setup Utility icon on your computer's desktop.

Double-click on the FrameChannel icon and enter your username and PIN to the account you created (or your existing account). Check the FrameChannel box and click OK.

Step 3: Connect your frame to your PC to pair your FrameChannel account with your frame.

Connect your frame to your PC using the supplied USB cable provided. On the frame, select the USB->PC icon from the Device selection screen (the same screen you saw in step 1). Go back to your PC and Click the "Send" button in the EDGE Wi-Fi Setup Utility to submit your account information to the frame.

Disconnect the USB cable from your frame. On the frame, select the WiFi icon from the Device Selection screen again to display the available photo services. Press the ENTER on the FrameChannel icon and your slideshow will begin.

Last updated: December 10, 2008